Fujitsu AIRSTAGE J-IIIL Design & Technical Manual page 635

 Refrigerant circuit address setting
NOTE: Perform this setting on the master remote controller.
1. While displaying the function setting screen, press the TEMP. "
lect the 2-wire remote controller address.
Function setting screen
2. Press the START/STOP
Example: Selecting the 2-wire remote
controller address
3. Press the TEMP. "
Function number
4. Press the START/STOP
Function number
5. Press the TEMP. "
Refrigerant circuit address
1-4. Address setting by remote controller
button to switch to the function number setting.
/
" or TEMP. " " button to adjust the function number.
button to switch to the refrigerant circuit address setting.
/
" or TEMP. " " button to adjust the refrigerant circuit address number.
- (07-35) -
" or TEMP. " " button to se-
Example: Selecting the 2-wire remote
controller address (002-01)
Function number
Function number
Refrigerant circuit address
Example: Selecting refrigerant
circuit address data "18"
1. System settings