Fujitsu AIRSTAGE J-IIIL Design & Technical Manual page 688

¢ Indoor unit function setting
NOTE: Perform this setting on the master remote controller.
1. While displaying the function setting screen, press the TEMP. "
lect the 2-wire remote controller address.
Function setting screen
2. Press the START/STOP
Example: Selecting the 2-wire remote
controller address
3. Press the TEMP. "
4. Press the START/STOP
Function number
5. Press the TEMP. "
Setting number
6. Press the START/STOP
ting result will be displayed.
2-6. Indoor unit (setting by UTY-RSRY, UTY-RHRY)
button to switch to the function number setting.
/
" or TEMP. " " button to adjust the function number.
button to switch to the setting number adjustment.
/
" or TEMP. " " button to adjust the setting number.
button. The data will be transferred to the indoor unit, and the set-
/
- (07-88) -
" or TEMP. " " button to se-
Example: Selecting the 2-wire remote
controller address (002-03)
Function number
Function number
Setting number
2. Function settings