Fujitsu AIRSTAGE J-IIIL Design & Technical Manual page 616

 Button name and function
Address code indicator on the remote controller and the operation lamp on IR receiver unit and on
the indoor unit are as shown in the figures below.
• For an outline of the address setting, refer to
• For the details of function number and setting number used for the function setting, refer to
tion details" on page 07-96.
• It does not matter whether the refrigerant circuit address or indoor unit address is set first. (The
method shown here sets the indoor unit address first.)
• During address setting mode, indoor unit reject the any operation command from remote con-
troller.
Wireless remote controller
MODE button
- Starts the address setting mode
- Changes the address indicator digits
START/STOP button
Transmits address setting
TIMER set (-) button
Used to reconfirm the address setting
TIMER set (+) button
Used to confirm the address setting
IR receiver unit
Operation lamp
RELATED LINKS
"Indoor unit (setting by wireless remote controller)"
1-4. Address setting by remote controller
OPERATION lamp
Indication of address code
TIMER lamp
Indication of address data number (the right digit)
FILTER lamp
Indication of address data number (the left digit)
MANUAL/AUTO button
Long press (3 sec or more): Switches between the address setting mode
and the address setting complete mode
Short press: Switches the lamp indication
Indoor unit address display
ON
OFF
(Light continuously)
- (07-16) -
"Address setting" on page 07-3.
Function number
01: Indoor unit address
02: Refrigerant circuit address
Setting number
Indoor unit address valid range: 00 to 63
Refrigerant circut address valid range: 00 to 99
Switches between the setting number (bottom line)
and function number (top line)
SET TEMP. "
Increases and decreases the displayed number
Refrigerant circuit address display
ON
OFF
on page 07-78
"Func-
FAN button
" button
" and "
Indoor unit
MANUAL
AUTO
(Light 1 sec. ON / 1 sec. OFF)
1. System settings