Fujitsu AIRSTAGE J-IIIL Design & Technical Manual page 406

¢ Overview
g
f
e
Display panel
m
l
1
* : Not available for a heat pump model unless it is set up as
an administrative indoor unit.
2
* : Not available for a heat pump model.
3
* : Not available for a cooling-only model.
4
* : Set the function setting of the indoor unit accordingly.
5
* : During address display mode.
2-8. Simple remote controller (With operation mode: UTY-RSRY)
a
b
c
d
h
i
j
k
a LED lamp
Lights during operation.
b Louver button
Adjusts the airflow direction.
c START/STOP button
Starts and stops operation.
d FAN control button
Switches the fan speed as follows:
Auto
High
e Room temperature sensor (inside)
Senses ambient temperature of unit.
f Set temperature button
Selects the setting temperature.
64.4—86 °F (18—30 °C) [COOL], 50—86 °F (10—30 °C)
[HEAT]
g Operation mode button
Switches the operation mode as follows:
1
Auto * Cool
h Operating mode indicator
i Airflow direction indicator
j FAN speed indicator
k Remote controller address indicator
l Status icons
Mode mismatch
4
Filter sign *
Defrost operation
Oil recovery operation
Under maintenance
Error
Special state
Conducting electricity
Emergency stop
Operation controlled
Forced stop
Remote controller sensor is enabled *
Central controlled
Setting temperature range is enabled
Operation prohibited
m Set temperature
Indicates indoor unit address. *
- (05-68) -
Med Low Quiet
2 3
Dry Fan * Heat *
4
5
2. Control units