Fujitsu AIRSTAGE J-IIIL Design & Technical Manual page 801

• Operation status
Outdoor temperature
Outdoor temperature zone *
Fan
*: The outdoor temperature zone transition from one to another will stay in that zone for minimum of 30 min.
NOTE: • In following operations, EEV will be on in heat pump prohibition zone.
– Other than heating
– Test run
• This control is enabled when the function setting number 35 of the outdoor unit (presence
of heater selection control by outdoor temperature) is enabled.
3-3. External output
46.4°F (8°C)
42.8°F (6°C)
(Factory setting)
-0.4°F (-18°C)
-4°F (-20°C)
On
EEV On/Off
Off
12 V
Heater
0 V
On
DIP-SW2-3 On
Off
On
DIP-SW2-3 Off
Off
Combination zone
- (08-47) -
Heat pump only zone
3. Indoor unit