¢ Electrical wiring
• For non-polar 2 wire
• For polar 3 wire
NOTES:
• Do not bind the power cable and the remote controller cable to avoid erroneous operation.
• Use shielded cable for transmission cable in accordance with the regional cable standard.
• Use sheathed PVC cable or shielded cable for remote controller cable in accordance with the
regional cable standard.
• Use ground wire to ground the Network convertor.
3-1. Network convertor (UTY-VTGX)
Wired remote
controller
Indoor unit
Max. 1 unit
Max. 16 units
Network convertor
Transmission cable
Indoor unit
Max. 16 units
Network convertor
- (05-111) -
Transmission cable
Wired remote
controller
SET TEMP.
START/STOP
Max. 1 unit
3. Adaptor/Convertor units