Waveform Recording And Playing; Common Settings; Figure 17.1 "Record" Menu - Rigol HDO4000 Series User Manual

Waveform Recording and Playing

17
Waveform Recording and Playing
Waveform recording/playing function can play the recorded waveforms of the analog
input channels (CH1-CH4), enabling you to analyze the waveforms better.
You can enter the "Record" menu in the following ways.
• Click or tap the function navigation icon
"Record" menu.
• Click or tap Record in the toolbar to enter the "Record" menu.
• Press the front-panel
menu to enter the "Record" menu.
TIP
When the acquisition mode is set to
not available. You can view waveform segments using
17.1

Common Settings

Waveform Recording
Click or tap the Record on/off switch to enable or disable the waveform recording
function. Before recording the waveform, you can refer to descriptions in
Options
to set the waveform recording parameters.
HDO4000 User Guide
228
and then select Record to enter the
key and select Record in the pop-up "Analyse"

Figure 17.1 "Record" Menu

UltraAcquire
, the waveform recording/playing function is
To navigate segments
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
.
Record