Waveform Recording And Playing; Common Settings; Figure 20.1 "Record" Menu - Rigol DHO924S User Manual

20
20.1
DHO900 User Guide
1.888.610.7664
220

Waveform Recording and Playing

Waveform recording/playing function can play the recorded waveforms, enabling you
to analyze the waveforms better.
You can enter the "Record" menu in the following ways.
• Click or tap the function navigation icon
"Record" menu.
• Click or tap Record on the toolbar to enter the "Record" menu.
• Press the front-panel
menu to enter the "Record" menu.
TIP
When the acquisition mode is set to
not available. You can view waveform segments using

Common Settings

Waveform Recording
Click or tap the Record on/off switch to enable or disable the waveform recording
function. Before recording the waveform, you can refer to descriptions in
Options
to set the waveform recording parameters.
www.calcert.com
15
10 20
5 25
0 30
and then select Record to enter the
key and select Record in the pop-up "Analyse"

Figure 20.1 "Record" Menu

UltraAcquire
, the waveform recording/playing function is
Navigate segments
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
.
Record
sales@calcert.com