Registration Section; Registration Roller Paper Skew Adjustment - Konica Minolta bizhub PRO 1050 Service Manual

11. MECHANICAL ADJUSTMENT

11.2 REGISTRATION SECTION

11.2.1

Registration roller paper skew adjustment

Perform this adjustment when there is skew in the registration section.
[3]
[2]
510
1
1.
Remove the screw [1] and then make sure the
graduation of the screw [1].
2.
Loosen 3 screws [2].
[1]
3. Move the registration section [3] to the arrow on
the basis of the graduation.
4.
Tighten the screw [1] and screws [2].
[2] 5. Perform copy/printing to check the paper skew.
6.
In case it is not improved, repeat steps 1 to 5.
Info HJG:
Justage der Passergenauigkeit ist ein
Zusammenspiel der Position der
<Druckeinheit> und der Einstellung
der<Registrationseinheit> !
Achtung: Vor dem lösen der Druckeinheit,
vorher Gerät ausschalten !
1050fs3070c
Field Service Ver3.0 Nov.2006