Konica Minolta bizhub PRO 1050 Service Manual page 88

3. PERIODIC CHECK
[1]
[2]
[1]
56
1
NOTE
• When reinstalling the developer unit, make
sure that the developing unit stopper roller [1]
is in contact with the developing unit stopper
plate [2]. (DS secured)
• When the developing unit stopper roller is too
[2]
easily rotated, remove it once and then rein-
stall it.
[1]
1050fs2116c
5.
Reinstall the above parts following the removal
steps in reverse.
NOTE
• When reinstalling the developer unit, be care-
ful that the front panel of the photo conductor
section does not come into contact with the
developing roller [1].
1050fs2111c
• Never rotate the developing gear to the
arrow-marked direction [2].
Field Service Ver3.0 Nov.2006