Konica Minolta bizhub PRO 1050 Service Manual page 105

Field Service Ver3.0 Nov.2006
B. Replacing the cleaning blade
NOTE
• When replacing the cleaning blades, be sure to replace 2 blades at the same time.
• Be sure to avoid touching the edge of the cleaning blade with bare hands.
(1) Periodically replaced parts/cycle
• Cleaning blade: Every 750,000 prints
(2) Procedure
1.
2.
[1]
3.
4.
[2]
1050fs2119c
Pull the photo conductor section out of the main
body. (See P.38)
Remove the cleaning section.
Remove the screw [1] and then remove the
cleaning blade /2 [2].
Reinstall a new cleaning blade /2.
3. PERIODIC CHECK
(See P.72)
73