Konica Minolta bizhub PRO 1050 Service Manual page 208

3. PERIODIC CHECK
[10]
[1]
176
[6]
[7]
[8]
[5]
[2] [9]
[3][4]
1050fs2183c
Field Service Ver3.0 Nov.2006
5. Remove the screw [1] and then remove the fus-
ing sensor cover plate [2].
NOTE
• When reinstalling the fusing sensor cover
plate, be sure to set the positioning hole [3] to
the projection [4] of the fusing paper exit sec-
tion.
6.
Remove the screw [5] and then remove the fus-
ing claw /Lw assembly [6].
NOTE
• When reinstalling the fusing claw /Lw assem-
bly, be sure to set the positioning hole [7] to
the projection [8] of the fusing paper exit sec-
tion.
7.
Remove 2 screws [9] and then remove the fusing
actuator assembly [10].