Konica Minolta bizhub PRO 1050 Service Manual page 195

Field Service Ver3.0 Nov.2006
G. Replacing the fusing cleaning sheet assembly
(1) Periodically replaced parts/cycle
• Fusing cleaning sheet assembly: Every 1,500,000 prints
(2) Procedure
[1]
[2] [1]
1050fs2172c
1.
Pull out the ADU from the main body.
2. Remove the fusing section.
3.
Open the web section
4. Remove the fusing heater lamps /1 and /2.
(See P.159)
5.
Remove the fusing roller
6. Remove the fusing roller /Lw assembly.
(See P.162)
7.
Remove 2 screws [1] and then remove the fusing
cleaning unit [2].
3. PERIODIC CHECK
(See P.112)
(See P.156)
[1].(See P.158)
/Up.(See P.161)
163