Konica Minolta bizhub PRO 1050 Service Manual page 158

3. PERIODIC CHECK
L. Replacing the registration roller /Up and the registration bearing
(1) Periodically replaced parts/cycle
• Registration roller /Up: Every 6,000,000 prints
• Registration bearing: Every 6,000,000 prints
(2) Procedure
[3]
[2]
126
[4]
[1]
1050fs2150c
Field Service Ver3.0 Nov.2006
1. Pull out the ADU from the main
2.
Remove the paper dust removing brush for the
registration roller /Lw.
3.
Remove the paper dust removing brush for the
registration roller /Up.
4. Remove the registration
5.
Remove the screw [1] and then remove the knob
[2].
6. Remove 2 screws [3] and then remove the gear
[4].
body.(See P.112)
(See P.113)
(See P.114)
section.(See P.118)