Konica Minolta bizhub PRO 1050 Service Manual page 182

3. PERIODIC CHECK
[2]
[2] [5]
[1] [4]
150
[2]
[3]
[1]
1050fs2787c
[7] [5] [6]
[3]
1503fs2205c
Field Service Ver3.0 Nov.2006
3. Remove 2 connectors [1].
4.
Remove 2 stepped screws [2] and then remove
the paper reverse/exit section [3].
NOTE
• When attaching the stepped screw [2], make
sure that it gets in securely up to the step of
the screw.
5.
Disconnect the connector [1].
6.
Remove the spring [2].
7. Remove the screw [3] and release the fixing of
the actuator [4].
8.
Remove 2 screws [5] and then remove the
reverse/exit solenoid assembly [6].
NOTE
• Reinstall the reverse/exit solenoid assembly
so that it comes to the same graduation [7] as
that used for removal.