Konica Minolta bizhub PRO 1050 Service Manual page 84

3. PERIODIC CHECK
[1]
[5]
52
6.
[3]
7.
[2]
NOTE
• When reinstalling the drum claws, be sure to
• When reinstalling the drum claws, be sure to
[3]
• After reinstalling the dram claws, check to
[4]
8.
1050fs2103c
Field Service Ver3.0 Nov.2006
Remove the C-clip [1], pull out the shaft [2] in the
arrow-marked direction and remove the 3 drum
claws [3].
Remove the springs [4], one each, from each of
the dram claws.
clean the shaft with drum cleaner and a
cleaning pad. Reinstalling the separation
claws with toner adhered causes the opera-
tion to slow down.
insert the C-clip between the ribs [5].
see if they move smoothly.
Reinstall the above parts following the removal
steps in reverse.