3. PERIODIC CHECK
3.5.6
Paper feed section
A. Removing/reinstalling the pick-up roller assembly/separation roller assembly
NOTE
• The pick-up roller assembly/separation roller assembly are CMS corresponding parts.
(1) Procedure
NOTE
• The method for replacing the pick-up roller assembly/separation roller assembly is the same for
tray /1 and tray /2. The explanation here is given for tray /1.
• After completion of the installation, rotate the pick-up roller in the direction of the paper feed
(counterclockwise as seen from the front) to check to see if the paper feed roller, the belt and the
coupling section rotate smoothly. The rotation of the pick-up roller is restricted only to the direc-
tion of the paper feed (counterclockwise as seen from the front) and be absolutely sure not to turn
it clockwise.
• Be sure to take note that the direction of the pick-up roller is different for the main body and the
PF.
[1]
86
1.
When the power switch is off, open the toner
supply door.
2.
Raise up the tray lock lever [1] lightly and pull out
the tray [2].
[2]
1050fs2700c
Field Service Ver3.0 Nov.2006