Konica Minolta bizhub PRO 1050 Service Manual page 576

Field Service Ver3.0 Nov.2006
Classifi- Jam
cation code
DF J62-8
J62-9
J62-10
J63-1
J63-2
J63-3
J63-4
J63-5
J63-6
Cause
When exiting a large size double sided
original, the original exit sensor /Lt
(PS307) does not turn ON within a
specified period of time after the original
reverse sensor (PS309) turns ON.
When exiting a large size single sided
original, the original exit sensor /Lt
(PS307) does not turn OFF within a
specified period of time after it turns
ON.
When exiting a large size double sided
original, the original exit sensor /Lt
(PS307) does not turn OFF within a
specified period of time after it turns
ON.
When outputting a large size double
sided original from the reverse section,
the original reverse sensor (PS309)
does not turn ON.
When entering a large size double sided
original into the reverse section, the
original reverse sensor (PS309) does
not turn OFF within a specified period of
time after it turns ON.
When outputting a large size double
sided original from the reverse section,
the original reverse sensor (PS309)
does not turn OFF within a specified
period of time after it turns ON.
When exiting a small size single sided
original, the original exit sensor /Rt
(PS314) does not turn OFF within a
specified period of time after the original
reverse sensor (PS309) turns ON.
When exiting a small size double sided
original, the original exit sensor /Rt
(PS314) does not turn OFF within a
specified period of time after the original
reverse/exit sensor (PS313) turns ON.
When exiting a small size single sided
original, the original exit sensor /Rt
(PS314) does not turn OFF within a
specified period of time after it turns
ON.
Resulting
operation
The DF stops Open the DF open/close
immediately. If cover and remove
there is paper jammed paper if any.
being transferred
or having been
transferred, the
main body com-
pletes the paper
exit before stop-
ping operations.
13. JAM CODE
Correction
541