Photo Conductor Section - Konica Minolta bizhub PRO 1050 Service Manual

3. PERIODIC CHECK
3.5.2

Photo conductor section

A. Removing/reinstalling the photo conductor section
NOTE
• When the drum section has been removed, be sure to store it in a dark place with the drum cover
provided.
• When removing/reinstalling the photo conductor section, be careful not to rotate the drum in any
direction other than the specified direction. Rotating it in the opposite direction to the rotational
direction while printing may cause damage to the cleaning blade.
• When removing/reinstalling the photo conductor section, be absolutely sure not to touch the drum
claw.
(1) Procedure
[3]
38
[1]
[2]
1050fs2089c
[2]
[1]
1050fs2090c
Field Service Ver3.0 Nov.2006
1.
Open the front doors /Rt and /Lt.
2. Bring down lever A of the ADU.
(See P.112)
3.
Loosen 3 screws [1] and remove the photo con-
ductor section cover [2].
4. Remove screw [1].
5.
Loosen screw [2] and pull out the intermediate
toner hopper [3].