Konica Minolta bizhub PRO 1050 Service Manual page 305

Field Service Ver3.0 Nov.2006
[4]
[2]
[3]
[2]
[3]
[1] [2]
1050fs2756c
[1]
1050fs2757c
8. Remove the E-ring [1] and then remove the gear
[2] and the pin [3].
9.
Remove the E-ring [4].
10.
Slide the pulley [1] and remove the wire end [2]
from the shaft hole [3].
NOTE
• When reinstalling it, lift up the paper lift plate
a little to give slack to the lift wire you want to
insert. Then insert the wire ends [2] into the
shaft hole [3] one at a time and fix it with the
pulley [1].
6. OTHERS
273