Konica Minolta bizhub PRO 1050 Service Manual page 304

6. OTHERS
[6] [4]
[5]
[1]
[2]
[4]
[8]
272
4.
[2]
5.
6.
7.
[3]
NOTE
• When removing the gear mounting plate [4],
• When reinstalling it, make sure that the step
[7]
• Be sure to reinstall the bearing (large) [5] from
1050fs2755c
Field Service Ver3.0 Nov.2006
Remove the E-ring [1].
Remove 5 screws [2].
Remove the screw [3].
Remove the bearing [5], the bearing [6] and the
torque restriction gear [7] together with the gear
mounting plate [4].
take note that the gear comes off freely.
[8] of each shaft gets in the gear mounting
plate [4] securely.
the outside of the gear cover [4] and the bear-
ing (small) [6] from the inside.