Field Service Ver3.0 Nov.2006
[3]
[2]
[1]
[4]
[6]
[1]
[2]
[3]
[5]
[6]
1050fs2749c
11.
Remove 2 E-rings [1], 2 washers [2] and 2 bear-
ings [3], and take out the conveyance exit roller
[4].
NOTE
• When taking out the conveyance exit roller
[4], the bearing [6] of the paper dust guide
brush assembly [5] is displaced. When rein-
stalling it, be sure to get it back to the original
place.
12.
Reinstall the above parts following the removal
steps in reverse.
3. PERIODIC CHECK
109