Konica Minolta bizhub PRO 1050 Service Manual page 82

3. PERIODIC CHECK
I. Replacing the drum claw
NOTE
• When reinstalling the drum claw, take note of the direction and position of the claw.
(1) Periodically replaced parts/cycle
• Drum claw: Every 1,000,000 prints
(2) Procedure
[4]
[1]
50
[3]
[3] [2]
1050fs2101c
Field Service Ver3.0 Nov.2006
1.
Pull out the photo conductor
2.
Remove the cleaning unit.
3. Remove the drum. (See P.48)
4.
Disconnect the connector [1] and remove the
spring [2].
5. Remove 2 screws [3] and then remove the drum
claw unit [4].
section.(See P.38)
(See P.72)