Konica Minolta bizhub PRO 1050 Service Manual page 359

Field Service Ver3.0 Nov.2006
10.3 Machine adjustment
10.3.1 Tray adjustment
Adjust the paper size from tray /1 to tray /5.
This adjustment is needed when a paper size is not
detected properly.
(1) Procedure
1.
Enter the service mode.
2.
"Service mode menu screen"
Press the [01 Machine Adjustment] key.
3. A sub menu appears on the right side of the
screen.
Press the [01 Tray Adjustment] key on the sub
menu.
4. "Tray adjustment screen"
Tray adjustment includes the following items.
Press the [Next] key or the [Back], and select
(1) of the tray you adjust.
[Tray 1 (1)]
[Tray 1 (2)]
[Tray 2 (1)]
[Tray 2 (2)]
[Tray 3 (1)]
[Tray 3 (2)]
[Tray 4 (1)]
[Tray 4 (2)]
[Tray 5 (1)]
[Tray 5 (2)]
Note
• Be sure to select (1) of the tray you adjust.
Info HJG:
Wichtig: Zum Ausführen Justage müssen
die Papiermagazine eingeschoben sein !
Info HJG:
1. 250mm
2. 297mm
5. Pull out the selected tray and widen the paper
guide [1] to the max. width. Narrow the paper
guide [1] slowly to fill a gap [3] between the lift
plate cover [2] and the paper guide [1] until it
reaches the scale "250"[4]. (The scale inside
the paper guide is 250 mm)
[2] [3]
250mm 250mm
[1]
6. Set the tray.
7. Press the [Start] key on the screen.
The current position of the selected tray is read
in. When the adjustment is done, the message
"Complete" appears.
8. Press the [Next] key and select (2) of the trays
you want to adjust.
Note
• Be sure to select (2) of the trays you want
to adjust.
9.
Pull out the tray and widen the paper guide to
the max. width. Narrow the paper guide slowly
to fill a gap between the lift plate cover and the
paper guide until it reaches the scale "A3·A4".
(The scale inside the paper guide is 297 mm)
10. Set the tray.
10. SERVICE MODE
[1]
[4]
1050fs3021c
327