Konica Minolta bizhub PRO 1050 Service Manual page 543

11. MECHANICAL ADJUSTMENT
[1]
[2]
[3]
[4]
508
7.
[1]
Note
• Removing the screws [1] and [2] causes the
8.
Note
• Be sure to connect the connector as you
1050fs3040c
Field Service Ver3.0 Nov.2006
Remove 2 screws (with washers) on the right and
left side[1] and 2 screws on the upper side [2].
tray front cover [3] to fall. Support the cover
not to drop.
Remove the connector [4] to remove the tray front
cover [3].
place it. Otherwise, all trays in the main body
become unable to be pulled out.