Konica Minolta bizhub PRO 1050 Service Manual page 538

Field Service Ver3.0 Nov.2006
[1]
[1] [3]
[4]
5.
6.
[2]
1050fs3032c
7.
[2]
8.
1050fs3033c
11. MECHANICAL ADJUSTMENT
Set the tray. Confirm that the paper lift finished its
elevation to the top by hearing the sound of the
paper lift motor. Pull out the tray again.
Remove 2 screws [1] to remove the paper feed
cover [2].
Check whether the actuator [1] of the pick-up
roller section matches with the center [3] position
of the upper limit sensor /1 (PS6), /2 (PS12) [2].
Remove the pick-up roller section [4]. (See P.86)
503