Konica Minolta bizhub PRO 1050 Service Manual page 160

3. PERIODIC CHECK
[1]
[8]
[11]
128
[2]
[9]
[10]
[4]
[3]
[7]
[6]
[5]
1050fs2152c
Field Service Ver3.0 Nov.2006
8. Remove the E-ring [1] and then remove the regis-
tration bearing [2].
9.
Remove the E-ring [3] and then remove the gear
[4] and the pin [5].
10.
Remove the E-ring [6] and then remove the regis-
tration bearing [7].
11. Open the pre-transfer jam handler [8] and move
and remove the registration roller /Up [9] in the
arrow-marked directions [10] and [11] in this
order.
12.
Reinstall the above parts following the removal
steps in reverse.