Konica Minolta bizhub PRO 1050 Service Manual page 410

10. SERVICE MODE
NO CSRC
parameter
(Z1)
138 89 SD convey solenoid
139 8A SD solenoid
140 8B SDFNS solenoid /2
141 8C ADF pick up roller
142 8D ADF feed roller
143 8E ADF retard roller
144 8F ADF sub pick roller
145 90 ADF torque limiter
146 91 ADF SDF solenoid
147 92 ADF LSB solenoid
148 93 ADF press/release SD
149 94 ADF SSB solenoid
150 95 Toner collect box
151 96 Recycling cut pump
152 97 Accumulator
153 98 Stirring plate assy
154 99 PB sub tray exit solenoid
155 9A PB SC roller release
motor
156 9B PB SC stopper solenoid
157 9C PB SC pressure arm sole-
noid
158 9D PB switchback roller
159 9E PB pick-up roller
160 9F PB paper feed roller sep-
aration roller
161 A0 PB paper pick up clutch
162 A1 PB cover paper separa-
tion clutch
163 A2 PB roller cutter blade assy
164 A3 PB filter /1
165 A4 PB filter /2
166 A5 PB straight gate solenoid
*1 The large size original represents all originals in the mixed original mode; A3, B4, A4S, B5S, 8K, 16KS, 11
x 17, 8 / x 14, 8
1 1
2
378
2
Parts name Parts No.
15AN8251
13QE8251
12QR8252
13GA4604
15AS4605
13GA4606
13GA4601
13GA-135
13GA8252
13GA8251
13GA8251
13GA8251
14RT-970
14RT-210
14RT-230
56UA-347
56UA-348
15ANR714
13GQ8005
15AA8251
A07B746
13GQ4519
55VA-464
55VA-463
56AA8201
56AA8201
A0756230
A0753724
A0753734
56QA8251
/ x 11S, 8 x 13, 8 / x 13, 8
1
2 4
1 count for each paper exit to the folding sec-
tion.
1 count for each paper exit to the stacker.
Original feed count in all modes.
Total original feed count in the single feed mode.
• 1 count for each set of the large size original
single side mode.
• 1 count for each sheet of the large size orig-
inal double side mode. *1
1 count for each sheet of the large size original
double side mode. *1
1 count for each sheet of the small size original
double side mode.
1 count for each paper exit in the single side
mode, 2 counts in the double side mode.
1 count for each paper exit in the single side
mode, 2 counts in the double side mode.
1 count for each paper exit on the sub tray.
1 count for each paper exit on the stacker.
1 count for each paper exit.
1 count for each book exit in PB tray cover
mode.
1 count for each book exit in cover trimming mode.
1 count for each paper exit.
1 count for each book exit except in PB tray
cover mode.
/ x 13 and 8 / x 13.
1 1
8 2
Field Service Ver3.0 Nov.2006
Count conditions