Registration Roller Solenoid (Sd2) - Konica Minolta magicolor 2500W Service Manual

5. Other
[1]
5.3.22

Registration roller solenoid (SD2)

64
[2]
A00VF2C530DA
[2]
[1]
4139fs2051c1
4139fs2067c1
Field Service Ver. 1.0 Aug. 2006
3. Remove the screw [1] and the tray1
paper pick-up solenoid [2].
1. Remove the right cover.
See P.33
2. Remove the power supply cooling
fan motor assy.
See the removal procedure steps 6 to 7
of "DC power supply" on p.43
3. Disconnect the connector, remove
the screw [1], and remove the regis-
tration roller solenoid [2].
Precaution for reinstallation
• Reinstall the solenoid so that the
clearance between the gear of the
registration roller clutch and flapper
falls within the specified range.
Specifications: 1.0 ± 0.2 mm