Test Pattern Density; Running Test Mode - Konica Minolta bizhub PRO 1050 Service Manual

10. SERVICE MODE
10.8.2

Test pattern density

Set the density of test pattern.
Wichtig: Test pattern density auf 255 einstellen !
(1) Procedure
1.
Enter the service mode.
2.
"Service mode menu screen"
Press the [06 Test Mode] key.
3.
A sub menu appears on the right side of the
screen.
Press the [02 Test Pattern Density] key.
4.
"Test pattern density setting screen"
Enter a numeric value through the numeric keys
and press the [Set] key and then press the
[COPY] key.
• Setting range: 0 (light) to 255 (dark).
5.
Set the A3 or 11 x 17 paper. Press the Start
button to output the test pattern.
428
Field Service Ver3.0 Nov.2006
10.8.3

Running test mode

Conduct a test while in the continuous print opera-
tion.
In this mode, the following items can be selected:
• Intermittent copy mode
After completion of the printing operation for the
set print count, the machine changes into the
ready state and waits for 0.5 sec. before resum-
ing the same operation.
• Paperless running mode
Without detecting paper or jam, the printing
operation is made nearly at the same timing as
the normal operation. In the same manner as the
intermittent mode, after completion of the print-
ing operation for the set print count, the machine
changes into the ready state and waits for 0.5
sec. before resuming the same operation.
• Paperless mode
Without detecting paper or jam, the printing
operation is made nearly at the same timing as
the normal operation.
• Paperless endless mode
The machine operates with the print count infi-
nitely set automatically. In the same manner as
the paperless mode, without detecting paper or
jam, the printing operation is made nearly at the
same timing as the normal operation.
• Running mode
The printing operation is made in the paperless
endless mode plus the scanning operation and
the auto paper feed tray switching.
(1) Procedure
1. Enter the service mode.
2. "Service mode menu screen"
Press the [06 Test Mode] key.
3.
A sub menu appears on the right side of the
screen.
Press the [03 Running Mode] key.
4. "Running mode menu screen"
Select a mode and press the [COPY] key.
5.
Press the Start button to start the running test.
6.
Press the STOP button to stop the running
test.