Writing Section - Konica Minolta bizhub PRO 1050 Service Manual

Field Service Ver3.0 Nov.2006
6.3.3

Writing section

Cautions:
• Be absolutely sure not to turn on the writing section with it displaced from its regular position.
• Be absolutely sure not to remove the writing section cover. If laser beams get in your eyes, you
may suffer loss of sight.
• After turning off the main power switch (SW1) or the power switch (SW2), be absolutely sure not to
remove the writing section for about 2 minutes.
A. Removing/reinstalling the writing section
(1) Procedure
[4]
[1]
[3]
[3]
[1]
[2]
[1]
[4]
1050fs2085c
1.
Remove the right cover.
(See P.250)
2. Remove 8 screws [1] and then remove the writ-
ing section cover [2].
NOTE
• When reinstalling the writing section cover
[2], hold it by inserting the notch holes [3] at
either side into the hooks [4] of the main body
frame.
6. OTHERS
269