Konica Minolta bizhub PRO 1050 Service Manual page 249

Field Service Ver3.0 Nov.2006
E. Connection to the main body
(1) When using the parallel cables
Preparations are made of the following when a connection is made.
• PC into which transferred files (rewritten data) have been copied.
• Parallel cables
1) Procedure
Step
1 Turn OFF the power of the copier.
2 Turn OFF the power of the PC.
3 Remove 5 screws and then remove the upper right cover.
4 Connect the IEEE1284 port and the PC with the cable.
5 Connect the parallel cables of the PC to the ISW connectors of the copier.
NOTE
• When exiting the ISW, be sure to clean each mirror of the scanner.
Operations
5. FIRMWARE VERSION UP
217