Konica Minolta bizhub PRO 1050 Service Manual page 7

SAFETY AND IMPORTANT WARNING ITEMS
3. CHECKPOINTS WHEN PERFORMING ON-SITE SERVICE
Konica Minolta brand products are extensively tested before shipping, to ensure that all applicable safety stan-
dards are met, in order to protect the customer and CE from the risk of injury. However, in daily use, any electri-
cal equipment may be subject to parts wear and eventual failure. In order to maintain safety and reliability, the CE
must perform regular safety checks.
1. Power Supply
Connection to Power Supply
• Check that mains voltage is as specified.
Connection to wrong voltage supply may result in fire or electric shock.
• Connect power plug directly into wall outlet having same configuration as
the plug.
Use of an adapter leads to the product connecting to inadequate power
supply (voltage, current capacity, grounding), and may result in fire or
electric shock.
If proper wall outlet is not available, advice the customer to contact quali-
fied electrician for the installation.
• Plug the power cord into the dedicated wall outlet with a capacity greater
than the maximum power consumption.
If excessive current flows in the wall outlet, fire may result.
• If two or more power cords can be plugged into the wall outlet, the total load
must not exceed the rating of the wall outlet.
If excessive current flows in the wall outlet, fire may result.
• Make sure the power cord is plugged in the wall outlet securely.
Contact problems may lead to increased resistance, overheating, and the
risk of fire.
• Check whether the product is grounded properly.
If current leakage occurs in an ungrounded product, you may suffer elec-
tric shock while operating the product.
Connect power plug to grounded wall outlet.
S 4
-
WARNING
? V
kw