Konica Minolta bizhub PRO 1050 Service Manual page 166

3. PERIODIC CHECK
[9]
[2]
[4]
[8]
[7]
134
[8]
[1]
[3]
[6]
[5]
1050fs2161c
Field Service Ver3.0 Nov.2006
16. Remove the E-ring [1] and then remove the
spacer [2].
17.
Remove the belt [3] and then remove the pulley
[4] and the pin [5].
18.
Remove 2 screws [6] and then remove the bear-
ing [7].
19. Pull out the ADU conveyance roller /4 [8] and
remove it.
20. Following the steps 16 to 19, remove the ADU
conveyance roller /3 [9].
NOTE
• Each roller is provided with one E-ring. Be
sure to remove also this E-ring when replac-
ing the roller.