Error List - Konica Minolta bizhub PRO 1050 Service Manual

5. FIRMWARE VERSION UP
5.1.5

Error list

Detection function
• When the copier main body detects an abnormal condition after turning on the power, the copier does not
display it on the main body touch panel, but inform you of it by lighting or flashing the LED (with the ISW
placed in the standby condition). For the LED display, see the table given below.
No.
1 CPU in initialization when the power is turned on
2 Flush memory in checking
3 When an error is detected while in memory check (ISW standby status)
4 ISW processing (data being received from the PC and flush memory being
written)
5 When an abnormality is detected while in data transmission
6 When an error is detected while in writing flush memory
7 Memory check successfully completed: while in rebooting
(1) ISWTrns error list
The ISWTrns displays messages when an error is shown or the transaction is completed. The table below
shows the contents of the message and the status of the ISWTrns.
Message
The opening of the file the checksum of which is
to be taken is not available.
The opening of the file the checksum of which is
to be taken cannot be read.
The file cannot be opened.
The LPT port cannot be opened
Communication port setting acquisition error
Communication port setting error
The transferred file cannot be opened.
The Term Test file cannot be transmitted.
Transmission of the file failed.
The transmission to the LPT port failed.
The folder name is illegal.
The generation of the thread failed.
The transferred file is not found.
222
Transaction
The opening of the checksum file failed. The file is in use
or damaged.
The reading of the checksum file failed. The memory is
insufficient or the OS is in trouble.
The opening of the transferred file failed. The file is in use
or damaged.
The opening of the LPT port failed.
The access to GetCommState failed.
The access to GetCommState failed.
The opening of the transferred file is unavailable. The file
is in use or damage.
The transmission of the communication test block failed.
1. The copier side is not in the receiving condition.
2. The cable is disconnected.
3. The transferred file is wrong.
The transmission of the transferred file failed. Communi-
cation troubles such as a disconnected cable.
The output to the LPT port failed. Communication trou-
bles such as a disconnected cable.
The name of the input folder is illegal. Be sure that the
input be started with the drive name such as "C:\"
The generation of the thread failed.
A file that copies a file is not selected or does not exist in
the folder.
Field Service Ver3.0 Nov.2006
Power save LED
OFF
OFF
Flashing in orange
Flashing in green
Flashing alternately in
red and green
Flashing in red
OFF
Status of the ISWTrns