Konica Minolta bizhub PRO 1050 Service Manual page 295

Field Service Ver3.0 Nov.2006
[8]
[6]
[2]
[1]
[5]
[4]
6. Move the exposure unit [1] to the notch [2] of the
main body frame.
[9] 7.
Remove the screw [3] and then remove the cable
clamp [4].
8.
Remove the connector [5].
9.
Remove the screws [6], one each, and then
remove the lamp presser plates /Fr [7] and /Rr
[8].
10. Remove 2 screws [9] and then remove the expo-
sure lamp [10].
11.
Reinstall the above parts following the removal
steps in reverse.
[10]
[2]
[3]
[9]
[6]
[7]
1050fs2082c
6. OTHERS
263