Konica Minolta bizhub PRO 1050 Service Manual page 138

3. PERIODIC CHECK
[1]
[3]
[2]
[2]
106
5.
[2]
NOTE
• When installing the bearing [3], be sure to
install it from the inside to the gear cover [2].
[3]
1050fs2745c
6.
NOTE
• The gear removed at the step 4 is different
from the one removed at the step 6. Be care-
ful not to confuse one with the other.
[1]
1050fs2746c
Field Service Ver3.0 Nov.2006
Remove 2 screws [1] and then remove the gear
cover [2] and the bearing [3].
Remove the E-ring [1] and then remove the gear
[2] and the pin [3].