Konica Minolta bizhub PRO 1050 Service Manual page 183

Field Service Ver3.0 Nov.2006
[1]
[2]
9.
1050fs2792c
10.
[3]
[1]
1050fs2788c
11.
[1]
1050fs2789c
Remove 2 screws [1] and then remove the bear-
ing.
Remove the E-ring [1] and 2 screws [2], and slide
the bearing [3] in the arrow-marked direction.
Pull out and remove gently the shaft [1] of the
fusing exit roller so that it does not touch the
guide plate.
3. PERIODIC CHECK
151