Konica Minolta bizhub PRO 1050 Service Manual page 570

Field Service Ver3.0 Nov.2006
Classifi- Jam
cation code
Tray 4 J14-01
(PF)
J14-02
J14-03
J14-04
Tray 5 J15-01
(PF)
J15-02
J15-03
J15-04
J15-05
J15-06
Cause
The paper feed sensor /2 (PS78) does
not turn ON within a specified period of
time after the pick-up clutch /2 (CL9)
turns ON.
The pre-registration sensor /2 (PS93)
does not turn ON within a specified
period of time after the pick-up clutch /
2 (CL9) turns ON.
When the trailing edge of paper is pass-
ing through the loop sensor /2 (PS94),
the pre-registration sensor /2 (PS93) is
turned ON by the succeeding paper.
The pre-registration sensor /2 (PS93)
turns ON while in idling.
The paper feed sensor /3 (PS84) does
not turn ON within a specified period of
time after the pick-up clutch /3 (CL12)
turns ON.
The pre-registration sensor /3 (PS95)
does not turn ON within a specified
period of time after the pick-up clutch /
3 (CL12) turns ON.
The vertical conveyance sensor /3
(PS96) does not turn ON within a speci-
fied period of time after the pre-registra-
tion sensor /3 (PS95) turns ON.
When the trailing edge of paper is pass-
ing through the vertical conveyance
sensor /3 (PS96), the pre-registration
sensor /3 (PS95) is turned ON by the
succeeding paper.
The vertical conveyance sensor /3
(PS96) turns ON while in idling.
The pre-registration sensor /3 (PS95)
turns ON while in idling.
Resulting
operation
If there is a sheet Pull out tray /4 and
of paper being remove jammed paper if
printed when a any.
jam occurs, the
main body com-
Open tray /4, the PF
pletes the paper
front door and the hori-
exit before stop-
zontal conveyance jam
ping operations.
release lever and remove
jammed paper if any.
— Pull out tray /4 and
remove jammed paper if
any.
If there is a sheet Pull out tray /5 and
of paper being remove jammed paper if
printed when a any.
jam occurs, the
main body com-
Open tray /5, the PF
pletes the paper
front door and the verti-
exit before stop-
cal conveyance door /
ping operations.
Lw, and remove jammed
paper if any.
After completion
of the exit of the
preceding paper,
the main body
stops operations.
— Open the PF front door
and the vertical convey-
ance door /Lw and
remove jammed paper if
any.
Pull out tray /5 and
remove jammed paper if
any.
13. JAM CODE
Correction
535
2