Konica Minolta bizhub PRO 1100 Quick Manual
  1. Manuals
  2. Brands
  3. Konica Minolta Manuals
  4. Printer
  5. bizhub pro 1100
  6. Quick manual

Konica Minolta bizhub PRO 1100 Quick Manual

Hide thumbs Also See for bizhub PRO 1100:
Table of Contents

Advertisement

Quick Links

See also: Maintenance Manual

Quick Guide

1
B ef ore Getti ng Started
2
Le t' s Mak e P rints
3
In stal ling So f twa re
4
B asic O pe rations
5
Maintain ing the Fin ishin g Qu al i ty
6
Trou blesh ootin g
7
Ap p end ix

Advertisement

Table of Contents
loading

Related Manuals for Konica Minolta bizhub PRO 1100

Summary of Contents for Konica Minolta bizhub PRO 1100

  • Page 1: Quick Guide

    Quick Guide B ef ore Getti ng Started Le t' s Mak e P rints In stal ling So f twa re B asic O pe rations Maintain ing the Fin ishin g Qu al i ty Trou blesh ootin g Ap p end ix...

  • Page 2: Notations And Symbols Used In This Manual

    Welcome Thank you for purchasing this machine. This Quick Guide describes basic operations, maintenance, troubleshooting for this machine. This information will be useful to enable the full capabilities of this machine and to utilize such functionality efficiently. Please keep this manual in a safe place where you can access it easily. Notations and symbols used in this manual WARNING WARNING...

  • Page 3: Intended Use

    The user's guides are intended for the following users of the system: Operator: Person who has been trained by Konica Minolta or authorized partner to operate the system for its intended use as well as manage consumables, and perform the maintenance and troubleshooting described in user's guides.

  • Page 4: Configuration And Usage Of This Guide

    Configuration and Usage of this Guide Configuration and Usage of this Guide There are two types of User's Guides for this machine: booklet manuals and User's Guide CD. When you want to learn about detailed functions or operation procedures, refer to the HTML User's Guide included in the User's Guide CD.

  • Page 5: Html User's Guide Operating Environment

    PRO 1100 HTML User's Guide operating environment )Supported Operating Systems/Browsers This guide describes the operation verification in the operating systems and browsers shown below. Operating system Web browser Windows Vista (Service Pack 2) Internet Explorer 9.x Windows 7 (Service Pack 1) Internet Explorer 11.x...

  • Page 6: Conventions Used In This Guide

    This guide describes product names and system configurations as follows. Product name Conventions used in this guide bizhub PRO 1100 This machine: Indicates the entire system including options and functions. The main body: Indicates the main unit that provides print functions in this machine.

  • Page 7: Table Of Contents

    PRO 1100 Make a Note about This Machine Information Checking the mounted optional devices Get to know the optional devices mounted on this machine. You can check a part of the mounted optional devices on the [MACHINE] screen of the touch panel.

  • Page 8: Checking Network Information

    Make a Note about This Machine Information Checking network information Make a note about network information required to use functions of this machine such as printer functions and various applications. To check network information, print out the Configuration Page Print. )Printing out the Configuration Page Print From the [MACHINE] screen on the touch panel, select [Controller] - [Report Type] - [Network Setting], then press [Execute].
  • Page 9 PRO 1100 Contents Intended use of this machine ........... . x-i Intended use .

  • Page 10: Contents

    Contents Installing Software Installing the Printer Driver............3-1 Operating environment .
  • Page 11 PRO 1100 Troubleshooting Replenish and Replace Consumables ..........6-1 Replacing a toner bottle .
  • Page 12 Contents Weight for each size............7-22 Weight for each size .

  • Page 13: Before Getting Started

    PRO 1100 Before Getting Started Turning the Power ON/OFF )Power supply This machine has two power switches: main power switch and sub power switch. NOTICE The main power switch is normally kept turned on. The main power switch must be turned on or off only when you start this machine for the first time or when you restart this machine.

  • Page 14: Turning The Power Off

    Turning the Power ON/OFF Tips If [Machine is warming up] is displayed on the [MACHINE] screen, it indicates that this machine is in the warm-up state. Warm-up processing takes approximately 6.5 minutes. )Turning the power off Turn off the sub power switch. The touch panel display is cleared, and the Power LED on the control panel changes from blue to orange.

  • Page 15: Power-Saving Function

    PRO 1100 )Power-saving function Using the following functions can reduce the power consumption of this machine and provide greater power-saving effects. Function Description Power Save func- Auto Low Power Turns off the touch panel display to reduce the power consumption tion of this machine.
  • Page 16 Turning the Power ON/OFF Tips Utility/Counter - [Administrator Setting] - [System Setting] - [Power Save Setting] - [Power Save Function Setting] is the same as Utility/Counter - [User Setting] - [System Setting] - [Power Save Setting] - [Power Save Function Setting], use either of the methods to configure a setting. If Power Save on the control panel is pressed for one second or more, either of Auto Low Power or Auto Shut OFF is enabled.

  • Page 17: Available Operations In This Machine

    PRO 1100 Available Operations in this Machine Major functions of this machine )Print functions You can print data on this machine via the printer driver using the application software installed on your computer. You can configure a layout or finish setting by implementing a simple action when printing data.

  • Page 18: Scan Functions

    Available Operations in this Machine )Scan functions You can send the scan data as an E-mail attachment, send it to a shared computer (SMB server), FTP server, or WebDAV server, and save it to the USB flash drive installed on this machine. In addition, you can give a scan instruction from a computer on the network to import the scan data to your computer.

  • Page 19: Application Functions

    PRO 1100 Application functions )Tone curve adjustment function (Color Centro) Color Centro is an application that enables efficient color management on your computer. To realize optimal printing results, you can adjust and specify tone curves. )Job management function (Job Centro) Job Centro is an application that enables job management of this machine.

  • Page 20: Let's Make Prints

    Printing Flow Let's Make Prints This chapter describes a basic print workflow using this machine. First confirm the basic flow to print data, then add detailed settings and adjustment to meet your requirements. Reference For information about application settings of this machine and adjustment procedures, refer to the HTML User's Guide.

  • Page 21: Step 3: Configure Information Of The Paper Loaded Into A Tray In This Machine

    PRO 1100 Step 3: Configure information of the paper loaded into a tray in this machine Specify the type, size, weight, and other values of paper. For details, refer to page 4-6. Step 4: Use the printer driver to print data Print original data through your computer.

  • Page 22: Step 5: Check The Finishing

    Printing Flow Click the [General] tab on the setting screen of the printer driver, then select the paper size of the original data in [Original Size]. Check the setting, then click [OK]. In [Paper Tray], you can select a tray to load paper to be printed into. For information about other functions of the printer driver, refer to the HTML User's Guide.

  • Page 23: Installing Software

    PRO 1100 Installing Software Installing the Printer Driver Operating environment )In a Windows environment Item Specifications Operating System Windows Vista, Windows 7, Windows 8.1, Windows 10, Windows Server 2008, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2...

  • Page 24: In A Windows Environment

    Installing the Printer Driver In a Windows environment )Installation Start the installer from the Driver CD supplied with this machine, then install the printer driver on your computer. This guide describes an example procedure to install the PS Plug-in driver in a Windows 7 environment. For information about how to install another printer driver, refer to the HTML User's Guide.
  • Page 25 PRO 1100 Select the name of the printer to be installed, then click [Next]. If the required printer name cannot be found, click [Have Disk], then directly specify the [Setup.inf] file. Click [Finish]. If the [Windows Security] window is displayed, click [Install this driver software anyway].

  • Page 26: Default Setting

    Installing the Printer Driver )Default setting Check that optional information of this machine is configured correctly on the printer driver. If optional information of this machine is not configured correctly on the printer driver, you cannot use optional functions. If any optional function is mounted, be sure to configure a setting. Display the printer window.

  • Page 27: In A Macintosh Environment

    PRO 1100 In a Macintosh environment )Installation Install the printer driver on your computer from the Driver CD supplied with this machine, then add the desired printer to the computer. This guide describes how to install the PS Plug-in driver in a Mac OS X 10.8 environment and add a Bonjour-connected printer.
  • Page 28 Installing the Printer Driver When the installation has been completed, click [Close]. Then, add a Bonjour-connected printer to your computer. In the Apple Menu, select [System Preferences], then click the [Printers & Scanners] icon. In OS X 10.6, click the [Print & Fax]. In OS X 10.7/10.8, click the [Print &...
  • Page 29 PRO 1100 Specify the Bonjour-connected printer to be added in the [Name] list. Specifying a printer displays the appropriate printer driver in the [Use] field. If the printer driver is not displayed correctly, select [Select Printer Software], then directly specify [KONICA MINOLTA 1100PS].

  • Page 30: Default Setting

    Installing the Printer Driver )Default setting Check that optional information of this machine is configured correctly on the printer driver. If optional information of this machine is not configured correctly on the printer driver, you cannot use optional functions. If any optional function is mounted, be sure to configure a setting. Select a print command of the application, then select the required printer name from [Print].

  • Page 31: Installing Applications

    PRO 1100 Installing Applications Operating environment )Color Centro Item Specifications Operating System Windows Vista, Windows 7, Windows 8.1, Windows 10, Windows Server 2008, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2 Intel Core2 Duo 3 GHz or higher...

  • Page 32: Color Centro Setup

    Installing Applications Color Centro setup )Function overview / Color management Color Centro is an application that enables efficient color management on your computer. Color Centro supports the following seven types of functions. Function Description [Calibration] This function is not available on this machine. [Tone Curve Adjustment] This function adjusts the color tone of an output image.

  • Page 33: Installation

    PRO 1100 )Installation Start the installer from the Color Centro CD-ROM supplied with this machine, and then install Color Centro on your computer. To install, the computer's administrator privilege is required. Insert the Color Centro CD-ROM into the CD-ROM drive of the computer.

  • Page 34: Start

    The JSP setting is a setting that relates to a connection with a Java application server. For information about the default administrator password, refer to page 6-15. Open the Start menu, and then click [All Programs] - [KONICA MINOLTA] - [Color Centro] - [KONICA MINOLTA Color Centro].

  • Page 35: Job Centro Setup

    PRO 1100 Job Centro setup )Function overview / Job management Using Job Centro, you can remotely operate jobs saved on this machine. You can also edit jobs and pages with Job Centro. You can change the paper setting or finish setting for jobs saved on this machine, move or delete pages while viewing page thumbnails, or insert a chapter separator.

  • Page 36: Installation

    Installing Applications )Installation Start the installer from the Job Centro CD-ROM supplied with this machine, and then install Job Centro on your computer. To install, the computer's administrator privilege is required. Insert the Job Centro CD-ROM into the CD-ROM drive of the computer. If the installer does not start, double-click [setup.exe] on the CD-ROM, and then proceed to Step 3.

  • Page 37: Start

    The JSP setting is a setting that relates to a connection with a Java application server. For information about the default administrator password, refer to page 6-15. Open the Start menu, and then click [All Programs] - [KONICA MINOLTA] - [Job Centro 2.0] - [KONICA MINOLTA Job Centro 2.0].

  • Page 38: Basic Operations

    Loading Paper Basic Operations Loading Paper Loading paper into the main body tray The same paper loading procedure is used for Tray 1 and Tray 2. This section describes how to load paper into Tray 1. Pull out the tray to load paper into. NOTICE Trays cannot be withdrawn when the machine is powered off.
  • Page 39 PRO 1100 Align the side guide plates and rear guide plate to the paper. Align the stack of paper to the feed roller side of the tray. While pressing the side guide lock release lever, align both side guide plates to the paper.

  • Page 40: Loading Paper Into The Paper Feeder Unit Pf-709

    Loading Paper Loading paper into the Paper Feeder Unit PF-709 The following describes how to load paper into an optional Paper Feeder Unit PF-709. The paper loading procedure is the same for Tray 3 to Tray 5. Reference For information about how to load paper into other optional paper feeder unit, refer to the HTML User's Guide. Pull out the tray to load paper into.
  • Page 41 PRO 1100 Fix the position of the side guide plates. Place about 100 sheets of paper with the print side up. While pressing the side guide lock release lever, align both side guide plates to the paper, then fix their position to fit the size indicator on the top of the side guide plates.
  • Page 42 Loading Paper Close the feed roller, then close the tray. Push the tray in until it locks into place. The amount indicator changes from in the tray information display area of the [MACHINE] or [COPY] screen. NOTICE Carefully close the tray. Otherwise, the machine may be subjected to an unexpected impact due to the tray or paper weight, which may lead to a machine error.

  • Page 43: Paper Setting

    PRO 1100 Paper Setting Specifying paper information for a tray Specify the required information (size, type, weight, and other values) for the paper loaded into a paper tray. When standard-size paper is loaded, the size is recognized automatically (Not applicable to the Large Capacity Unit LU-411 or Large Capacity Unit LU-412).
  • Page 44 Paper Setting Press [Paper Size]. Select one of the options under [Size Setting] to fit the paper loaded into the tray.

  • Page 45: Large Capacity Unit Lu

    PRO 1100 Specify the size. [Standard]: Recognized automatically. (Not applicable to the Large Capacity Unit LU-411 or Large Capacity Unit LU-412) In [Detect Size Setting], you can select the size to be detected. There is, however, a group of sizes having subtle distinctions, so that the machine cannot distinguish in the operation of size detection.
  • Page 46 Paper Setting [Tab Paper]: Specify the paper size and the number of tabs. If you select [Detect Size Setting] in [Standard], press [OK]. This returns to the [Size Setting] screen. This step is not required if you select [Custom] or [Tab Paper].
  • Page 47 PRO 1100 Specify other items, if necessary. Press [OK]. This returns to the [Paper Setting] screen. Press [Close]. This returns to the [MACHINE] screen. If you press [Paper Setting] on the [COPY] screen to specify the paper size, the screen returns to the [COPY] screen.

  • Page 48: Printer Driver Setting

    Printer Driver Setting Printer Driver Setting Printer driver functions The below describes how to set imaging from the printer driver. This guide describes a procedure example of how to print data using the PS Plug-in driver from Adobe Reader XI in Windows 7.

  • Page 49: [Screening]: Custom Screen Setting

    PRO 1100 )[Screening]: Custom screen setting On the print setting screen of the printer driver, open [Imaging], then specify [Dot Shape], [Screen Frequency], and [Screen Angle] on the [Custom Screen]. [Dot Shape] allows you to set the shape of a print dot. For details about the dot shape, refer to the printer driver help.

  • Page 50: [Tone Curve]: Tone Curve Setting

    Printer Driver Setting )[Tone Curve]: Tone curve setting On the print setting screen of the printer driver, open [Imaging], then select the [Image] and [Text/Graphics] settings of the [Tone Curve] from the list. To set the text and graphic density to the maximum level you can set on this machine, select the [Keep 100% Density for Text/Graphics] check box regardless of the tone curve setting.

  • Page 51: Maintaining The Finishing Quality

    PRO 1100 Maintaining the Finishing Quality Both Sides Adjustment Both Sides Adjustment When performing the duplex printing, you can adjust a misalignment between the front and back sides to align the printing positions on the front and back sides. This task is referred to as Both Sides Adjustment.

  • Page 52: Making The Both Sides Adjustment For Each Tray

    Both Sides Adjustment Reference If skewing or wrinkling occur during printing, adjust the registration loop amount before making the scan measurement adjustment, the gap adjustment, the chart adjustment or the zoom and image shift adjustment. For details, refer to the HTML User's Guide.
  • Page 53 PRO 1100 Press [Paper Setting] on the [MACHINE] screen. Select the tray with the target paper loaded, then press [Change Set]. Press [Both Sides Adj]. Check that [Scan Meas.] is displayed, then press [Output Background Sheet].
  • Page 54 Both Sides Adjustment When the [PRINT MODE] screen is displayed, press Start on the control panel. A background sheet is printed out. If you already have the background sheet available for measurement, you do not need to print out a background sheet. Proceed to Step 7. NOTICE Use paper of A3 or larger, or 11 e 17 or larger to output the background sheet.
  • Page 55 PRO 1100 Enter the number of adjustment charts you want to print out. You can print out 20 or more adjustment charts; however, only up to 20 adjustment charts can be scan-measured continuously. Press Start on the control panel.
  • Page 56 Both Sides Adjustment Place an adjustment chart on the original glass. Open the ADF, then place an adjustment chart with the front side facing up (not facing the original glass), setting the top side flush with the far end of the glass. Place the upper-left corner of the adjustment chart approximately 2 inches (approximately 5 cm) away from the vertical size guide and horizontal size guide respectively on the original glass making sure that the left and top sides are parallel to the vertical size guide and horizontal size guide respectively.
  • Page 57 PRO 1100 Press [Start] on the [Scan Adjustment Chart] screen. The adjustment chart is scanned. When scanning is properly completed, the counter of [Number of Scanning] on the Scan Adjustment Chart screen is added by one, and the blue frame displayed in the illustration on the screen shifts to the next one on the right side.
  • Page 58 Both Sides Adjustment Repeat the scanning steps 12 to 14 four times for every adjustment chart. First time: Set the front side of the adjustment chart face up (turned away from the original glass), with its top edge positioned to the back side. Second time: Set the front side of the adjustment chart face up (turned away from the original glass), with its bottom edge...
  • Page 59 PRO 1100 Select whether to continue the scan measurement or to finish the scan measurement and calculate the adjustment value. To continue the scan measurement, press [No]. To finish the scan measurement and calculate the adjustment value, press [Yes].
  • Page 60 Both Sides Adjustment Press [Close] to exit the adjustment. Scan Measurement Adjustment is then completed. To register adjustment values in a paper profile, press [Register]. For details about how to register a paper profile, refer to the HTML User's Guide. 5-10...

  • Page 61: Gap Adjustment

    PRO 1100 )Gap Adjustment To adjust a gap, print out a chart, measure a gap between the front and back sides at the specified measurement point of the back side using a scale to determine the adjustment value, and enter it. (Adjust the zoom ratio and image position of the back side based on the image position of the front side.)
  • Page 62 Both Sides Adjustment Select [Gap], then press [Print Mode]. When the [PRINT MODE] screen is displayed, press Start on the control panel. A test chart is printed out. Press [Exit Print Mode]. 5-12...
  • Page 63 PRO 1100 Measure the gap between the front and back sides at each point of [a] to [d] on the [back] side of the printed out chart. This figure shows an example to measure [a]. The scale resolution is 0.5 mm.
  • Page 64 Both Sides Adjustment When entry processing is completed, press [Adjustment Start]. The entered adjustment values are applied. Press Start on the control panel. A test chart is printed out. Check a gap of the printing position refering the printed out chart. Repeat steps 7 to 10 until all gaps between the front and back sides are cleared.
  • Page 65 PRO 1100 After the adjustment is completed, press [OK]. To finely adjust the adjustment value, continuously proceed to step 4 in "Zoom and Image Shift Adjustment" (page 5-23). Press [Close] to exit the adjustment. Gap Adjustment is then completed.

  • Page 66: Chart Adjustment

    Both Sides Adjustment )Chart Adjustment You can print out a Both Sides Adjustment chart, measure measurement points using a scale, and enter measurement values in order to carry out the adjustment. Using this function, you can only enter measurement values to carry out the both-side adjustment. This is convenient when an unclear misalignment is detected between the front and back sides to perform the duplex printing with a new type of paper or to change paper in a tray.
  • Page 67 PRO 1100 Select [Front], then press [Chart Adjustment]. Press [Print Mode]. When the [PRINT MODE] screen is displayed, press Start on the control panel. A test chart is printed out. Press [Exit Print Mode]. 5-17...
  • Page 68 Both Sides Adjustment Measure the line length at each of points [1] to [8] on the printed-out chart using a scale. The figure on the right illustrates an example [ 5 ] [ 1 ] to measure points [1] and [5]. As illustrated in this example, measure the line length at each printed point.
  • Page 69 PRO 1100 When entry processing is completed, press [Adjustment Start]. In the next step, adjust the back side. Select [Back], then press [Chart Adjustment]. Press [Print Mode]. When the [PRINT MODE] screen is displayed, press Start on the control panel.
  • Page 70 Both Sides Adjustment Press [Exit Print Mode]. Measure a misalignment between the marks of [1] to [4] printed on the [back] side of the output chart and the marks on the [front] side. The figure shows an example to measure [1]. The scale resolution is 0.5 mm.
  • Page 71 PRO 1100 Press [X] or [Y] at each point, and enter the measured value using the keypad, [,], or [+] on the screen. If the printing position is misaligned to the minus (-) side, enter a positive value (+). If the printing position is misaligned to the plus (+) side, enter a negative value (-).
  • Page 72 Both Sides Adjustment Press [Close] to exit the adjustment. Chart Adjustment is then completed. To register adjustment values in a paper profile, press [Register]. For details about how to register a paper profile, refer to the HTML User's Guide. 5-22...

  • Page 73: Zoom And Image Shift Adjustment

    PRO 1100 )Zoom and Image Shift Adjustment You can finely adjust the zoom ratio of the print side and the top, bottom, left, and right positions on the front and back sides. Because the adjustment data can be entered directly as a percentage or numerical value indicating the shift amount, it is convenient for fine adjustment after Scan Meas.
  • Page 74 Both Sides Adjustment Press [Front] or [Back] to select the print side to be adjusted. Enter the zoom ratio or the image shift value using the keypad, [,], or [+] on the screen or the Keypad on the control panel. To specify the zoom ratio, press [Vertical] or [Horizontal], then enter a value.
  • Page 75 PRO 1100 Zoom ratio adjustment example: The image on the front side is 10 mm in a lengthwise direction while the image on the back side has been lengthened to 10.1 mm. Press [Vertical] of [Back], then press [1][0][0].

  • Page 76: Image Quality Adjustment

    Image Quality Adjustment Image Quality Adjustment Image Quality adjustment Using [Tone Curve Adjustment] of Color Centro allows you to adjust the brightness and contrast of the entire image. To make adjustment, drag the slider or the point of curve. You can operate while viewing the preview display of adjustment results.

  • Page 77: Adjusting A Tone Curve Using Color Centro

    PRO 1100 Adjusting a tone curve using Color Centro This guide describes how to adjust a tone curve using Color Centro. Start Color Centro. For information about how to start Color Centro, refer to page 3-12. Click [Tone Curve Adjustment].
  • Page 78 Image Quality Adjustment When adjustment is completed, click [Save]. Enter the name of the adjusted tone curve. In [Destination Folder], select [Controller], then click [Save]. If [Controller] is selected, data is saved in the image controller of this machine. When the Save Complete message is displayed, click [OK].

  • Page 79: Adjusting The Finisher

    PRO 1100 Adjusting the Finisher Opening the screen to be adjusted When the finisher or Z-folding unit is installed on this machine, you can finely adjust its functions such as a folding or stapling position. Reference For details about how to adjust the finisher, refer to the HTML User's Guide.

  • Page 80: Adjustable Settings

    Adjusting the Finisher Press the items to be adjusted. The items displayed on this screen vary depending on the model of the mounted finisher. )Adjustable settings The following shows item examples that are displayed on the screen. The items displayed on this screen vary depending on the model of the mounted optional device.

  • Page 81: Troubleshooting

    PRO 1100 Troubleshooting Replenish and Replace Consumables )Replacing a toner bottle WARNING WARNING WARNING Do not throw toner or a container that contains toner (e.g., toner cartridge and developing unit) into an open flame. The hot toner may scatter and cause burns or other damage.
  • Page 82 Replenish and Replace Consumables NOTICE When replacing the toner bottle, check the toner type number indicated on the front side of the toner bottle inlet. Using incorrect toner bottles may cause the machine to malfunction. Press on the upper-right corner of the touch panel or Help on the control panel to display the help message.

  • Page 83: Replenishing Staple Cartridge Supply

    PRO 1100 )Replenishing staple cartridge supply If the staple cartridge becomes empty, the message [Pull out staple finisher stacker / then, set staples in stapler] is displayed on the [MACHINE] screen. Then, the [Staple Cartridge] indicator in the [Consumable and Scrap Indicators] area changes to yellow.
  • Page 84 Replenish and Replace Consumables Press the [Add Stapler] tab of the target stapler, then follow the on-screen instructions to replace the staple cartridge. The number on the right-hand side of the help message indicates a replacement procedure. To display the next step, press [,].

  • Page 85: Replacing A Waste Toner Box

    PRO 1100 )Replacing a waste toner box WARNING WARNING WARNING NEVER throw the waste toner box into a fire. Otherwise, the toner may ignite and cause a dangerous situation. If the waste toner box becomes full of waste toner, the message [Waste toner box is full / Please replace the box] is displayed on the [MACHINE] screen.
  • Page 86 Replenish and Replace Consumables Press [Consumable/Scrap]. Press the [Waste Toner] tab, then follow the on-screen instructions to replace the waste toner box. The number on the right-hand side of the help message indicates a replacement procedure. To display the next step, press [,].

  • Page 87: Clearing Paper Jams

    PRO 1100 Clearing Paper Jams How to view the animation guide If a paper jam occurs on this machine, the message [Paper JAM / Please remove paper following the guide] is displayed, and the position of the paper jam is displayed on the screen.

  • Page 88: Illustration Screen For Jam Handling

    Clearing Paper Jams )Illustration screen for Jam handling The overview of the method required to clear the jam is displayed on the [JAM Position] screen. Changing to the Illustration screen displays the procedure guidance, so you can clear a paper jam while checking each step. Press [Illustration] on the [JAM Position] screen.
  • Page 89 PRO 1100 Remove all jammed paper, then press [Close]. This returns to the [MACHINE] screen. Tips If the paper jam message has not been yet cleared even after all the jammed paper has been removed, the paper jam may have occurred in a place other than the one displayed. Check other places not displayed on the touch panel again.

  • Page 90: If The Specified Paper Is Not Found

    If the Specified Paper is not Found If the Specified Paper is not Found If the specified paper is not loaded into a tray at the time of printing, the message [Please load designated xxx paper / To check details, touch [Confirm Details]] is displayed on the screen. To address this problem, load the specified paper into a tray, or you can forcibly print on the currently loaded paper of a different size.
  • Page 91 PRO 1100 Replace paper into the tray, then press [OK]. Press Start on the control panel. Printing starts using the selected tray. 6-11...

  • Page 92: Forcibly Printing Using The Loaded Paper

    If the Specified Paper is not Found )Forcibly printing using the loaded paper Press [Confirm Details] on the [MACHINE] screen. Select a tray with print paper loaded, then press [Forced Output]. Press Start on the control panel. Printing starts using the selected tray. 6-12...

  • Page 93: Cannot Send Data

    PRO 1100 Cannot Send Data If you cannot send data, [Error] is displayed in [Send History] on the [JOB LIST] screen. Check the free space on the HDD (image controller area). Start the Web browser. Enter the IP address of the image controller in the address bar, and then press [Enter].

  • Page 94: When Gray Tones Did Not Come Out As Expected

    When gray tones did not come out as expected When gray tones did not come out as expected Due to a change in the ambient temperature and humidity, a change in conditions of this machine, a variation of shades of colors caused by use of different type of paper, or print mode setting, the brightness or contrast of gray tones may differ from the tones you were able to obtain before, and images may not be printed as expected.

  • Page 95: Image Position Adjustment

    PRO 1100 Image Position Adjustment The previously adjusted image position may be misaligned by a slight enlargement or reduction of paper that is caused due to a change in ambient temperature or humidity, a change of the machine conditions, usage of a different type of paper, or heat impact of the Fusing Unit.

  • Page 96: Appendix

    Good Use of the HTML User's Guide Appendix Good Use of the HTML User's Guide The HTML User's Guide is included in the User's Guide CD supplied with this machine. Select the desired item on the top page (Home), then check the detailed contents. To view the details about how to use the HTML User's Guide, select [User's Guides] on the top page (Home).

  • Page 97: Name Of Each Component

    PRO 1100 Name of each Component External components Name Description ADF (Reverse automatic document Automatically feeds multiple originals on a sheet basis to scan feeder) data. Even a 2-sided original can be scanned by one paper feed operation without reversing paper.
  • Page 98 Name of each Component Name Description Service port (USB 3.0 Type A e 2) Used to connect devices such as an external storage medium (USB flash drive, USB-HDD), keyboard, and mouse. This port is available for low-power devices only. Please provide an external supply of power for devices that re- quire a large amount of power.

  • Page 99: Internal Components

    PRO 1100 Internal components Name Description Main power switch Used only by service representative to turn the machine power on/off. Be sure not to turn it off in usual operation . Toner bottle Supplies the main body with toner.
  • Page 100 Name of each Component Name Description Side guide plate Aligned to the edges of loaded paper. Feed roller Feeds paper sheet by sheet to the printing unit. Side guide lock release lever Pushed backward to release the lock in order to move side guide plates.

  • Page 101: Control Panel Layout

    PRO 1100 Control Panel Layout Name Description Keypad Enters numeric values. Reset Returns the copy conditions to the default settings. Power LED Lights up in orange when the main power switch is turned on, then turns blue when the sub power switch is turned on.
  • Page 102 Name of each Component Name Description Access Used to suspend the operation when user authentication or ac- count track function is activated and an authenticated user has used the machine. The screen for user authentication/account track is displayed to allow the machine operation only when the next user is authenticated.

  • Page 103: Convenient Use Of Scan Function (Scan To Smb)

    PRO 1100 Convenient Use of Scan Function (Scan to SMB) You can send the scan data as an E-mail attachment, send it to a shared computer (SMB server), the FTP server, or the WebDAV server, or save it to the USB flash drive installed on this machine.

  • Page 104: In A Macintosh Environment

    Convenient Use of Scan Function (Scan to SMB) Enable file sharing. In Windows 7/8.1/10, select [Control Panel] - [Network and Internet] - [Network and Sharing Center] - [Change advanced sharing settings], then click [Turn on file and printer sharing] in the [Advanced sharing settings] window.

  • Page 105: Step 2: Connect This Machine To The Network

    PRO 1100 Enable the SMB-base sharing. Click [Options] on the [Sharing] window, select the [Share files and folders using SMB (Windows)] check box, then select the check box of the login user name (displayed name). Set to a shared folder.

  • Page 106: Major Specifications

    Major Specifications Major Specifications NOTICE The specifications of the machine and optional device are subject to a change without notice. Even if the specified paper size and weight are compatible with an optional device, if they are not supported by the entire system including the machine, the paper may not be able to be used.

  • Page 107: Feeding-Related Optional Devices

    PRO 1100 Feeding-related optional devices Reference The paper size and weight vary depending on conditions such as setting or finishing. For details about the detailed conditions or specifications, refer to the HTML User's Guide. )Paper Feeder Unit PF-709 Paper tray...

  • Page 108: Large Capacity Unit Lu-411

    Major Specifications )Large Capacity Unit LU-411 Paper tray Specifications Paper weight 40 g/m to 300 g/m / 10 lb Bond to 81 lb Bond Standard: A4 v, B5 v, 8.5 e 11 v, 9 e 11 v, 16K v Paper size Custom: Widthwise 250 mm to 314 mm, Lengthwise 176 mm to 229 mm / Width- wise 9.84"...

  • Page 109: Multi Bypass Tray Unit Mb-507

    PRO 1100 )Multi Bypass Tray Unit MB-507 For Multi Bypass Tray Unit MB-507 to function, it should be attached to Large Capacity Unit LU-411 or Large Capacity Unit LU-412. It cannot be used along with a paper feeder unit. For details, refer to the HTML User's Guide.

  • Page 110: Post Inserter Pi-502

    Major Specifications )Post Inserter PI-502 To use Post Inserter PI-502, mount it in one of Finisher FS-532. You can load paper into the upper and lower trays of Post Inserter PI-502 and feed paper to an output-related optional device. On the control panel of Post Inserter PI-502, you can configure the punch, staple, or fold function for paper to be fed from the lower tray (the configurable function varies depending on finisher models).

  • Page 111: Output-Related Optional Devices

    PRO 1100 Output-related optional devices Reference The paper size and weight vary depending on conditions such as setting or finishing. For details about the detailed conditions or specifications, refer to the HTML User's Guide. )Finisher FS-532 To use the punch function, the Punch Kit PK-522 is required.
  • Page 112 Major Specifications Specifications: Staple Maximum stapling capaci- Weight Plain Fine Others Length Length Length Length Length Length 399 mm / 400 mm / 320 mm / 321 mm to 400 mm / 139 mm / 15.71" or 15.72" or 12.6" or 399 mm / 15.72"...
  • Page 113 PRO 1100 Specifications: Punch (Punch Kit PK-522) Number of punch holes Metric area: 2 holes / 4 holes, Swedish 4 holes (Available only in Sweden) Inch area: 2 holes / 3 holes Hole diameter Metric area: 6.5 mm / 0.26" (2 holes / 4 holes / Swedish 4 holes) Inch area: 8.0 mm / 0.31"...

  • Page 114: Multi Puncher Gp

    Major Specifications )Multi Puncher GP-501 Conveyance Unit Function Punch The punch-hole pattern varies according to the die set. For details, refer to the HTML User's Guide. Specifications Function Bypass mode • Transports paper without punch processing. Punch mode • Carries out punch processing through a punch path (return path) •...

  • Page 115: Z Folding Unit Zu-608

    PRO 1100 Specifications Book size (sheets) Smallest: 5 body sheets (75 g/m / 20 lb Bond) + 2 covers (216 g/m / 57 lb Bond) Largest: 100 body sheets (75 g/m / 20 lb Bond) + 2 covers (216 g/m...

  • Page 116: Electronic Optional Devices

    Major Specifications Electronic optional devices Reference For information about optional devices not described below, refer to the HTML User's Guide. )Removable Hard Disk Kit RH-101 Specifications Function Pull out the HDD for the main body, and install it in the inner case supplied with the machine;...

  • Page 117: Bizhub Pro

    PRO 1100 Weight for each size NOTICE The product specifications are subject to a change without notice. )Weight for each size The paper weight (g/m / lb Bond) or ream weight (kg) unit is used to indicate the paper thickness, which varies depending on the manufacturer.

  • Page 118: Maximum Paper Size And Printing Area

    Maximum paper size and printing area Maximum paper size and printing area The maximum paper size and printing area that are available are as follows. Refer them when you output data or perform an imposition printing. Main Body Tray: 463 mm / 18.23" Maximum printing area Crosswise direction: 313.9 mm / 12.36"...
  • Page 119 http://www.konicaminolta.com Printed in China A799956111 © 2015 2016. 3...

Table of Contents