Konica Minolta bizhub PRO 1050 Service Manual page 243

Field Service Ver3.0 Nov.2006
C. Firmware copy
(1) Creation of the folder
Start the ISWTrns program the installation of which has been completed, and set a folder into which a trans-
ferred file (rewritten data) is stored.
1) Procedure
Step
1 Start the PC.
2 Select "ISWTrns" from the start menu or double
click the "ISWTrns" icon on the desktop to start
up the "ISWTrns program."
3 "ISWTrns dialog screen"
Click [OK] key to set a folder into which a trans-
ferred file (rewritten data) is stored.
4 "Option screen"
Set a folder into which a transferred file (rewritten
data) is stored and then click [Make Folder] key.
5 "Option screen"
Click [OK] key.
6 "ISWTrns screen"
The main screen of the ISWTrns program is displayed.
Operation
5. FIRMWARE VERSION UP
Remarks
This screen is displayed only when the
ISWTrns is started for the first time.
1. A folder (C:\Program Files\KonicaMi-
nolta\ISWTrns)into which the ISWTrns pro-
gram has been installed as a stored folder
(data folder) for default is set.
2. When changing a stored folder, click
[Browse] and specify any one as you please,
or make an entry directly in the editor box in
full path.
3. When the [Make Folder] key is clicked, a
hierarchical folder is created using the stored
folder set above as a route.
This operation stores the data folder created
in the step 4 into the INI file of the ISWTrns
program.
211