Malfunction code
2.3.4
P-6: Cyan Imaging Unit failure
2.3.5
P-7: Magenta Imaging Unit failure
2.3.6
P-8: Yellow Imaging Unit failure
2.3.7
P-9: Black Imaging Unit failure
Imaging Unit C
Imaging Unit M
Imaging Unit Y
Imaging Unit Bk
Step
Select "Image Adjust" → "PRT Max Density" and, if the setting value is negative, readjust.
1
2
Check the drive transmission portion of the Imaging Unit and correct as necessary.
3
Clean the AIDC Sensor window if dirty
4
Clean the contact of the Imaging Unit connector if dirty
5
Change Imaging Unit.
6
Change the Image Transfer Belt Unit.
2.3.8
P-21: Color Shift Test Pattern failure
Image Transfer Belt Unit
Step
1
Wipe clean the surface of the Transfer Belt with a soft cloth, if it is dirty
2
Change the Image Transfer Belt Unit if the Transfer Belt is damaged.
2.3.9
P-22: Color Shift Adjust failure
AIDC / Registration Sensor /1 (PC8)
Step
Check the LED retraction lever for locked position and, if there is any faulty condition evident,
1
slide out the Imaging Unit and reinstall it in position.
2
Reinstall or reconnect PC8 or PC9 if it is installed or connected improperly.
3
Check the Vertical Transport Guide for installed position and correct as necessary.
4-16
bizhub C350 Field Service Ver2.0 Sep. 2004
Relevant Electrical Parts
Image Transfer Belt Unit
Action
Relevant Electrical Parts
Action
Relevant Electrical Parts
AIDC / Registration Sensor /2 (PC9)
Action