Datalogic Magellan 1500i Product Reference Manual page 17

When installing the Riser, be sure to apply pressure only on the bottom cover,
not the Riser foot.
CAUTION
Bottom Cover
3. If the EAS will be needed, push the wire into the bottom cover notch to keep it acces‐
sible.
4. After the Stand or Riser is firmly attached, plug the Interface cable into the bottom of
the scanner. If installing the Tilting Stand, you can plug the cable in directly and instal‐
lation is complete.
Riser Foot
EAS
Cable
INSTALLING THE TILTING STAND / RISER
Notch
PRODUCT REFERENCE GUIDE
7