ENTER/EXIT PROGRAMMING MODE
USB-OEM Features
USB OEM Scanner Device Type
The OEM‐USB protocol allows for the scanner to be identified as one of two different types
of barcode scanners. Depending on what other scanners you may already have connected
to a USB POS, you may need to change this setting to enable all scanners to communicate.
Options are:
•
Table Top Scanner
•
Handheld Scanner
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan your selection from the barcodes below. You'll need to cover any unused bar‐
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
barcode.
DEFAULT
050D01(CR)
USB OEM Scanner Device Type = Handheld Scanner
88
MAGELLAN™ 1500I
050D00(CR)
USB OEM Scanner Device Type = Table Top Scanner