Green Spot Duration Time - Datalogic Magellan 1500i Product Reference Manual

Green Spot Duration Time

This feature specifies the time that the Green Spot is active.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan your selection from the barcodes below.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
barcode.
150205(CR)
Green Spot Duration = 50 mS
150264(CR)
Green Spot Duration = 1 second
PRODUCT REFERENCE GUIDE
ENTER/EXIT PROGRAMMING MODE
150200(CR)
Green Spot Duration = Disabled
DEFAULT
15020A(CR)
Green Spot Duration = 100 mS
1502FA(CR)
Green Spot Duration = 2.5 sec (250mS)
55