Appendix F. Host Commands; Accepting Rs-232 And Usb Com Commands - Datalogic Magellan 1500i Product Reference Manual

APPENDIX F
HOST COMMANDS

ACCEPTING RS-232 AND USB COM COMMANDS

The scanner responds to the following RS‐232 and USB COM commands:
COMMAND
Enable Scanner
Disable
Scanner
Reset Scanner
Not On File Indication
Beep Good Read Tone
Force Good Read
Tone
Identification request
Health request
Status request
Beep on ASCII BEL
a. Call Tech Support for information.
If one of the above commands is received, the scanner will perform the steps indicated for
the command. Host commands for other interfaces are also available. Contact Tech Support
for more details.
Information about additional features can be found in "
"
Image Capture to the Host by Host Command" on page 57
ASCII HEX COMMENT
E 0x45
D 0x44
R 0x52
F 0x46 Long series of beeps
Beeps if Good Read Beep is
B 0x42
enabled
Beeps regardless of beep set-
n/a 0x01
ting
i 0x69
Returns long response
h 0x68
Returns long response
s 0x73
Returns long response
Beeps if Beep on ASCII BEL is
! 0x07
enabled
a
a
a
Service Port Mode" on page 23
.
PRODUCT REFERENCE GUIDE
and
329