Label Id; Label Id Control - Datalogic Magellan 1500i Product Reference Manual

LABEL ID

LABEL ID

Label ID Control

This feature specifies whether or not Label IDs are transmitted to the host and if so,
whether to attach them as a prefix or suffix.
Choices are:
•
•
•
To select the option for Label ID Control:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan the desired option from the barcodes below. You'll need to cover any unused
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
020501(CR)
Label ID Control = Enable as a Prefix
PRODUCT REFERENCE GUIDE
Disable
Enable as a Prefix
Enable as a Suffix
barcodes on this and the facing page to ensure that the scanner reads only the bar‐
code you intend to scan.
barcode.
ENTER/EXIT PROGRAMMING MODE
020500(CR)
Label ID Control = Disable
DEFAULT
020502(CR)
Label ID Control = Enable as a Suffix
111