Ean-8 Guard Substitution - Datalogic Magellan 1500i Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

EAN-8 Guard Substitution

This setting enables the scanner to substitute a guard pattern for even‐parity 6 for EAN8/
JAN8 labels.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You'll need to cover any unused bar‐
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
barcode.
DEFAULT
02FB01(CR)
EAN-8 Guard Insertion = Enable
150
MAGELLAN™ 1500I
02FB00(CR)
EAN-8 Guard Insertion = Disable