CASE CONVERSION
CASE CONVERSION
This option can change the case of all alphabetic characters in scanned barcode data to
upper or lower case.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan barcode for the desired option below. You'll need to cover any unused barcodes
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
DEFAULT
033101(CR)
Case Conversion = Upper Case
PRODUCT REFERENCE GUIDE
Case conversion affects ONLY scanned barcode data, and does not affect
Label ID, Prefix, Suffix, or other appended data.
NOTE
on this and the facing page to ensure that the scanner reads only the barcode you
intend to scan.
barcode.
ENTER/EXIT PROGRAMMING MODE
033100(CR)
Case Conversion = No Case Conversion
033102(CR)
Case Conversion = Lower Case
123