Code 39 Length 2 - Datalogic Magellan 1500i Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

Code 39 Length 2

If Code 39 Length Control is set to Fixed‐Length decoding, this feature specifies Code 39
second fixed length. If Code 39 Length Control is set to Variable‐Length decoding, this fea‐
ture specifies the maximum label length.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan the barcode,
unused barcodes on this and the facing page to ensure that the scanner reads only
the barcode you intend to scan.
3. Scan the appropriate digits from the
sent the desired label length. The selectable range for this option is 00, no second
fixed length, or 01 to 50. Pad all single digit numbers with a leading zero to yield a
two‐digit entry (00‐50).
4. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode barcode.
DEFAULT
204
MAGELLAN™ 1500I
When in Fixed Length mode, if Length 2 is set to the value of 00,
then only Length 1 will apply
NOTE
Set Code 39 Length 2 on page 204
below. You'll need to cover any
Alpha-Numeric Keypad in Appendix C
04B3(CR)
Set Code 39 Length 2
Default setting for this feature = 32 (length = 50)
that repre‐